10mm Mini Step Metal Gear Motor – 20mm Type Model NFP-GM12-10BY
10mm Mini Step Metal Gear Motor – 20mm Type Model NFP-GM12-10BY
$12.50
With the 10by stepper gear motor 4.4/10mm shaft, enjoy seamless forward and reverse operation for your projects. Buy this essential component now! 🔧
10mm Diameter BLDC Stepper Motor Parameters
NFP-10BY small stepper motor used for intelligent pan/tilt, electric selfie stick, mobile phone camera tracking equipment, robots, intelligent manipulators, miniature printing equipment, etc. Direction: forward / reverse are available.
Stepper control: Convert electrical pulse signals into angular displacement control for easy intelligent control.
All-metal gears: Adopting all-metal gear material, it is more wear-resistant and prolongs service life.
D-shaped output shaft: more convenient to install, not easy to slip, save installation time.
| Motor Model | NFP-GM12-10BY |
|---|---|
| Motor Size | Φ10mm*12mm*20mm |
| Shaft Diameter | Φ3mm / D-cut: Φ2.5mm |
| Coil Resistance | 39Ω±7% |
| Step Angle | 18° / Step |
| No. of Phases | 2Phases 4Wires |
| Max. Starting Frequency | 900PPS Min. |
| Max. Slewing Frequency | 1200PPS Min. |
| Pull In Torque | 6 gf-cm Min. |
| Lead Out Torque | 10 gf-cm Min. |
| Rated Voltage | 5V DC |
| Weight | About 11g |
| Output Shaft Length | 4mm / 10mm (can be customized) |
| Wires | Red A- / White A+ / Black B- / Brown B+ |
| Ratio | Precise Ratio | Step Angle | Holding Torque | Pull-Out Torque |
|---|---|---|---|---|
| 1:10 | 9.68 | 1.86° | 0.12 kgf.cm | 0.03 kgf.cm |
| 1:20 | 19.36 | 0.93° | 0.24 kgf.cm | 0.06 kgf.cm |
| 1:30 | 29.47 | 0.61° | 0.36 kgf.cm | 0.09 kgf.cm |
| 1:50 | 51.1 | 0.35° | 0.6 kgf.cm | 0.15 kgf.cm |
| 1:100 | 99.3 | 0.18° | 1.2 kgf.cm | 0.3 kgf.cm |
| 1:150 | 150.96 | 0.12° | 1.8 kgf.cm | 0.45 kgf.cm |
| 1:210 | 209.76 | 0.086° | 2.5 kgf.cm | 0.63 kgf.cm |
| 1:298 | 297.9 | 0.06° | Max. 3 kgf.cm | 0.9 kgf.cm |
| 1:380 | 379.16 | 0.047° | Max. 3 kgf.cm | 1.1 kgf.cm |
Recommended Drive Parameters at Different Voltages
Recommended Driving Range:
(Based on the criterion that the motor does not produce significant resonance variation.)
Tested using a Stepper Motor Integrated Test System under full-step drive mode with a 39Ω motor winding resistance.
Non-current-limited driving (follower mode):
Voltage = Back EMF + (Winding Current × Winding Resistance)
Drive frequency vs torque relationship:
• Higher driving frequency → Lower output torque
• Lower driving frequency → Higher output torque
The following parameters refer to the input motor specifications
(The output speed can be directly calculated by dividing by the gearbox reduction ratio.)
| Parameter | 6V DC | 5V DC | 3.7V DC |
|---|---|---|---|
| Max Drive Frequency | 1400Hz | 1300Hz | 800Hz |
| Speed at Max Drive Frequency | 4200rpm | 3900rpm | 2400rpm |
| Current at Max Drive Frequency | ≤0.12A | ≤0.085A | ≤0.085A |
| Min Drive Frequency | 800Hz | 700Hz | 500Hz |
| Speed at Min Drive Frequency | 2400rpm | 2100rpm | 1500rpm |
| Current at Min Drive Frequency | ≤0.18A | ≤0.155A | ≤0.125A |
| Holding Current (0Hz) | ≤0.30A | ≤0.25A | ≤0.19A |
5V Metal Gear Stepper Motor 10BY Outline Drawing

Miniature BLDC Step Motors Connection Diagram
Terminal wiring sequence description: 1.25-4Y Wiring terminal, Wire: GB1571 30/UL, AWM, 105°

Keywords:
step gear motor, stepper dc gear motor, stepping geared motor
Free Shipping Site-wide When You Spend More Than $150
Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout
Still can't find ideal motors?
Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...
If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.













Reviews
There are no reviews yet.