12mm DC Gear Motor With Encoder – 26mm Type Model NFP-GM12-N10-EN
12mm DC Gear Motor With Encoder – 26mm Type Model NFP-GM12-N10-EN
$12.00
Harness the efficiency of the N20 Tiny DC Gear Motor With Encoder today! Enjoy quick installation and durability with its D-shaped shaft design.
Permanent Magnet DC Gear Reduction Motor Parameter
D-shaped shaft: more convenient to install, not easy to slip, save installation time.
Pure copper wire winding: The rotor is made of pure copper, with low resistance, strong conductivity, and increased motor torque.
| Motor Model | NFP-GM12-N10VA-EN |
|---|---|
| Rotation | CW & CCW |
| Rated Voltage | 3V |
| Shaft Length | 10mm |
| Output Shaft Diameter | Φ3mm D-shaped (D-cut: 2.5mm) |
| Weight | Appr. 10.5g |
| Speed Regulation | Yes |
Model: NFP-GM12-N10-EN, Max Output Power 0.42W, 22000RPM, 3V 27-Type
| Ratio | No Load | Rated Load | Stall | ||||
|---|---|---|---|---|---|---|---|
| i : 1 | Speed | Current | Speed | Current | Torque | Torque | Current |
| 10 | 2000 rpm | ≤180mA | 1000 rpm | ≤0.45A | 30 g.cm | ≥0.08 kg.cm | ≤0.85A |
| 20 | 1000 rpm | ≤180mA | 500 rpm | ≤0.45A | 70 g.cm | ≥0.16 kg.cm | ≤0.85A |
| 30 | 660 rpm | ≤180mA | 330 rpm | ≤0.45A | 100 g.cm | ≥0.24 kg.cm | ≤0.85A |
| 50 | 400 rpm | ≤180mA | 200 rpm | ≤0.45A | 180 g.cm | ≥0.4 kg.cm | ≤0.85A |
| 100 | 200 rpm | ≤180mA | 100 rpm | ≤0.45A | 350 g.cm | ≥0.8 kg.cm | ≤0.85A |
| 150 | 130 rpm | ≤180mA | 65 rpm | ≤0.45A | 500 g.cm | ≥1.2 kg.cm | ≤0.85A |
| 210 | 95 rpm | ≤180mA | 47 rpm | ≤0.45A | 700 g.cm | ≥1.7 kg.cm | ≤0.85A |
| 298 | 67 rpm | ≤180mA | 32 rpm | ≤0.45A | 1000 g.cm | ≥2.2 kg.cm | ≤0.85A |
| 380 | 52 rpm | ≤180mA | 26 rpm | ≤0.45A | 1300 g.cm | ≥3 kg.cm | ≤0.85A |
Note: all reduced no-load speeds have a tolerance of ±15%.
DC Small Metal Gearbox Motor Outline Drawing



Mini Gear DC Motor With Hall Encoder Wiring Tips

Motor power supply input [-] (green wire)
VCC Hall power supply input (blue wire)
C2 encoding signal B phase (white wire)
C1 encoding signal A phase (yellow wire)
GND Hall power supply input (black wire)
Motor power supply input [+] (red wire)
Encoder Parameters
Type: AB two-phase incremental magnetic Hall encoder
Rotation pulse output: basic pulse 7PPRX gear reduction ratio
Supply voltage: DC 3.3V/DC 5.0
Basic function: built-in pull-up shaping resistor, direct connection to microcontroller
Interface type: ZH1.5-6PIN (standard connection line)
Output signal type: square wave AB phase
Response frequency: 100KHz
Basic pulse number: 3 PPR
Number of magnetic ring trigger poles: 6 poles (3 pairs of poles)
Application: smart selfie stick, smart camera gimbal, smart robot camera corner, smart micro robot, etc.
Keywords:
micro dc gear motor, small geared motor, tiny dc gearmotors, micro gearmotors
Additional information
| Voltage | 27-Type 3V |
|---|---|
| Ratio | 1: 10, 1: 20, 1: 30, 1: 50, 1: 100, 1: 150, 1: 210, 1: 298, 1: 380 |
Free Shipping Site-wide When You Spend More Than $150
Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout
Related products
-

16mm Gear DC Motor with Encoder – 36mm Type Model NFP-GM16-030-EN
$15.00 Select options -

16mm Gear DC Motor With Rear Shaft – 38mm Type Model NFP-GM13-050RS-EN
$18.00 Select options -

16mm Gear Motor with Dust Cover – 38mm Type Model NFP-GM16-050
$13.00 Select options -

34mm DC Brush Electric Motor − 29mm Type Model NFP-RS-3429
$10.00 Select options
Still can't find ideal motors?
Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...
If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.
Reviews
Cart
Product Search
Product categories
Top rated products
-
8mm Coin Flat Vibration Motor − 3mm Type Model NFP-C0834
Rated 5.00 out of 5$3.00 -
32mm Brushless Worm Gear Motor – 67mm Type Model NFP-JGY-BL2418
Rated 5.00 out of 5$25.00 -
24mm Planetary Gear Motor Model NFP-GA24Y-370
Rated 5.00 out of 5$11.00 -
6mm Mini DC Gear Motor − 23mm Type Model NFP-614-136-0675 Standard Shaft
Rated 5.00 out of 5$7.00


Reviews
There are no reviews yet.