nfp electronics professional dc motor provider

12mm Micro DC Gear Motor – 31mm Type Model NFP-GM12-N20-EN-i1000

12mm Micro DC Gear Motor – 31mm Type Model NFP-GM12-N20-EN-i1000

$15.00

Discover the power of the Ratio Reduction 1000 Micro DC Gear Motor, engineered for maximum torque and versatility. Ensure your projects run smoothly!

USDUSD
EUREUR
GBPGBP
JPYJPY
HKDHKD
Product total
Options total
Grand total

Hall Encoder Low Noise Metal Gearbox Motor Parameter


The reduction ratio is 1:1000, which is relatively large, resulting in excessive torque of the whole machine. It should not exceed the rated torque of 2.5 kg.cm. It is forbidden to block the rotor or give external reverse force to the operation.

Motor Model NFP-GM12-N20VA-EN-i1000
Rotation CW & CCW
Rated Voltage 3V / 6V / 12V DC
Shaft Length 10mm
Output Shaft Diameter Φ3mm D-shaped (D-cut: 2.5mm)
Weight Appr. 13g

 

Model: NFP-GM12-N20-EN-i1000, Ratio 1000 :1

Voltage No Load Rated Load Stall
Motor Type Speed Current Speed Current Torque Torque Current
3VDC -A26 Type 8 rpm ≤35mA 5 rpm ≤0.18A 2.5 kg.cm ≥4 kg.cm ≤0.35A
3VDC -A45 Type 12 rpm ≤45mA 7 rpm ≤0.27A 2.5 kg.cm ≥4 kg.cm ≤0.65A
3VDC -A15 Type 15 rpm ≤50mA 9 rpm ≤0.33A 2.5 kg.cm ≥4 kg.cm ≤0.75A
6VDC -A05 Type 8 rpm ≤30mA 5 rpm ≤0.08A 2.5 kg.cm ≥4 kg.cm ≤0.2A
6VDC -A35 Type 11 rpm ≤40mA 7 rpm ≤0.15A 2.5 kg.cm ≥4 kg.cm ≤0.3A
6VDC -A26 Type 16 rpm ≤50mA 10 rpm ≤0.25A 2.5 kg.cm ≥4 kg.cm ≤0.6A
12VDC -A05 Type 15 rpm ≤40mA 12 rpm ≤0.1A 2.5 kg.cm ≥4 kg.cm ≤0.3A
12VDC -A35 Type 21 rpm ≤50mA 14 rpm ≤0.2A 2.5 kg.cm ≥4 kg.cm ≤0.6A
Note: all reduced no-load speeds have a tolerance of ±15%.

Reduction DC Gear Motor With Encoder Outline Drawing


Encoder Wiring Tips:
Motor power supply input M2 (White wire)
VCC Hall power supply input (5.0V/3.3V) (Blue wire)
C2 coded signal B phase (Green wire)
C1 coded signal A phase (Yellow wire)
GND Hall power supply input (5.0V/3.3V) (Black wire)
Motor power supply input M1 (Red wire)

Encoder Parameters:
Type: AB two-phase incremental magnetic Hall encoder
Line speed: basic pulse 7PPRx gear reduction ratio
Supply voltage: DC 3.3V / DC5.0
Basic function: built-in pull-up shaping resistor, direct connection to microcontroller
Interface type: ZH1.5-6PIN (standard connection line)
Output signal type: square wave AB phase
Response frequency: 100KHz
Basic pulse number (resolution): 7 PPR
Magnetic ring trigger pole number: 14 poles (7 pairs of poles)
Operating temperature range: -40℃~120℃.

Application: intelligent self-balancing two-wheeled vehicle, intelligent tracking car, smart home appliances, robots, camera jib, etc.

Keywords:
micro dc gear motor, small encoder gear motor, tiny dc gearmotors, micro gearmotors

Additional information

Voltage

A26-Type 3V, 8RPM, A45-Type 3V, 12RPM, A15-Type 3V, 15RPM, A05-Type 6V, 8RPM, A35-Type 6V, 11RPM, A26-Type 6V, 16RPM, A05-Type 12V, 15RPM, A35-Type 12V, 21RPM

Ratio

1: 1000

Reviews

There are no reviews yet.

Be the first to review “12mm Micro DC Gear Motor – 31mm Type Model NFP-GM12-N20-EN-i1000”

Your email address will not be published. Required fields are marked *

Free Shipping Site-wide When You Spend More Than $150

Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout



Still can't find ideal motors?

Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...

If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.

Reviews

Be the first to review “12mm Micro DC Gear Motor – 31mm Type Model NFP-GM12-N20-EN-i1000”

Your email address will not be published. Required fields are marked *

Presets Color

Primary
Secondary
PMD
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.