12mm Sonic Vibration Motor – 35mm Type Model NFP-1238-A609

12mm Sonic Vibration Motor – 35mm Type Model NFP-1238-A609

$15.00

AC Sonic Vibration Motor Small Volume Price (USD)

QTY BREAK UNIT PRICE
1+ $15.00
100+ $8

Contact us for a quotation for production quantities, customizations and integration.

Vibration Electric Sonic Toothbrush Motor Parameters


Motor Model NFP-1238-A609
Rated Voltage 3.6V AC
Starting Voltage 3.0V AC
Rated Current 450mA
Rated Load Torque 4 g
Rated Frequency 260Hz
Operating Voltage 3.0V – 4.5V AC
Operating Frequency 170Hz – 350Hz
No Load Frequency 380Hz
No Load Current 200mA
Stall Current 600mA
Equilibrium Position Torque 170 gf.cm
Insulation Resistance 10MΩ Min
Shaft Press Fit Force ≤8 kgf
Working Temperature & Humidity -10°C – 60°C; ≤90%RH
Storage Temperature& Humidity -30°C – 70°C; ≤80%RH
Working Life 1,000 H
Low Noise 40dB
Weight Appr. 18g

 

3.6V AC Sonic Vibrating Toothbrush Motor Outline Drawing


Brushless AC Vibration Motor Characteristics Curve


◆Note:

  • ☞ Because the BLAC motor makes a left-right swing motion, the power-on time in both forward and reverse directions needs to be adjusted to be consistent, so that there will be optimal vibration force and amplitude.
  • ☞ Do not supply DC voltage to the motor. At this time, the motor will work in a locked-rotor state, continue to heat up, and will not move. That is, when the motor is not required to vibrate, the power supply at both ends of the motor should be completely cut off.

Keywords:
sonic toothbrush motor, dc sonic motor, sonic vibration motor, acoustic vibration motor, 3.6v ac toothbrush motor

Reviews

There are no reviews yet.

Be the first to review “12mm Sonic Vibration Motor – 35mm Type Model NFP-1238-A609”

Your email address will not be published. Required fields are marked *

Free Shipping Site-wide When You Spend More Than $150

Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout


Still can’t find ideal motors?

Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote…

If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.

4 + 2 =

Reviews

Be the first to review “12mm Sonic Vibration Motor – 35mm Type Model NFP-1238-A609”

Your email address will not be published. Required fields are marked *