28mm Planetary Brushless Gear Motor Model NFP-GA28Y-BL2838
28mm Planetary Brushless Gear Motor Model NFP-GA28Y-BL2838
$36.00
Experience precision with our 28mm planetary brushless gear motor. Designed for efficiency, it offers multiple voltage options for your projects.
Brushless DC Planetary Gear Motor Datasheet
| Motor Model | NFP-GA28Y-BL2838 |
|---|---|
| Rotation | CW & CCW |
| Rated Voltage | 12V DC / 24V DC |
| No-load Speed | 15rpm – 3000rpm |
| No-load Current | 0.13A – 0.25A |
| Output Power | 2W / 8W |
| Max Torque | 30Kg.cm |
| Shaft Diameter | 6mm |
| Weight | 205g – 235g |
Model: NFP-GA28Y-BL2838-1260, 12V DC, 6000RPM, 2W
| Ratio | No Load | Rated Load | Stall | ||||
|---|---|---|---|---|---|---|---|
| i : 1 | Speed | Current | Speed | Current | Torque | Torque | Current |
| 4 | 1500 rpm | 0.13A | 1063 rpm | 0.6A | 0.2 kg.cm | 0.6 kg.cm | 1.7A |
| 16 | 375 rpm | 0.13A | 266 rpm | 0.6A | 0.75 kg.cm | 2.25 kg.cm | 1.7A |
| 25 | 240 rpm | 0.13A | 170 rpm | 0.6A | 1 kg.cm | 3 kg.cm | 1.7A |
| 64 | 94 rpm | 0.13A | 66 rpm | 0.6A | 2.25 kg.cm | 6.75 kg.cm | 1.7A |
| 88 | 68 rpm | 0.13A | 48 rpm | 0.6A | 3.25 kg.cm | 9.75 kg.cm | 1.7A |
| 110 | 54 rpm | 0.13A | 39 rpm | 0.6A | 4.5 kg.cm | 13.5 kg.cm | 1.7A |
| 125 | 48 rpm | 0.13A | 34 rpm | 0.6A | 5 kg.cm | 15 kg.cm | 1.7A |
| 138 | 43 rpm | 0.13A | 31 rpm | 0.6A | 5.5 kg.cm | 16.5 kg.cm | 1.7A |
| 151 | 39 rpm | 0.13A | 28 rpm | 0.6A | 5.75 kg.cm | 17.2 kg.cm | 1.7A |
| 256 | 23 rpm | 0.13A | 17 rpm | 0.6A | 9.5 kg.cm | 28.5 kg.cm | 1.7A |
| 320 | 18 rpm | 0.13A | 13 rpm | 0.6A | 12 kg.cm | 36 kg.cm | 0.5A |
| 400 | 15 rpm | 0.13A | 11 rpm | 0.6A | 15 kg.cm | 45 kg.cm | 1.7A |
| 500 | 12 rpm | 0.13A | 9 rpm | 0.6A | 19 kg.cm | 45 kg.cm | 1.7A |
| 625 | 9 rpm | 0.13A | 7 rpm | 0.6A | 20 kg.cm | 45 kg.cm | 1.7A |
| 756 | 8 rpm | 0.13A | 6 rpm | 0.6A | 20 kg.cm | 45 kg.cm | 1.7A |
| 832 | 7 rpm | 0.13A | 5 rpm | 0.6A | 20 kg.cm | 45 kg.cm | 1.7A |
Note: all reduced no-load speeds have a tolerance of ±15%.
Model: NFP-GA28Y-BL2838-24120, 24V DC, 12000RPM, 8W
| Ratio | No Load | Rated Load | Stall | ||||
|---|---|---|---|---|---|---|---|
| i : 1 | Speed | Current | Speed | Current | Torque | Torque | Current |
| 4 | 3000 rpm | 0.25A | 2125 rpm | 1.1A | 0.4 kg.cm | 1.2 kg.cm | 1.7A |
| 16 | 750 rpm | 0.25A | 531 rpm | 1.1A | 1.5 kg.cm | 4.5 kg.cm | 1.7A |
| 25 | 480 rpm | 0.25A | 340 rpm | 1.1A | 2 kg.cm | 6 kg.cm | 1.7A |
| 64 | 187 rpm | 025A | 132 rpm | 1.1A | 4.5 kg.cm | 13.5 kg.cm | 1.7A |
| 88 | 136 rpm | 0.25A | 96 rpm | 1.1A | 6.5 kg.cm | 19.5 kg.cm | 1.7A |
| 110 | 109 rpm | 0.25A | 77 rpm | 1.1A | 9 kg.cm | 27 kg.cm | 1.7A |
| 125 | 96 rpm | 0.25A | 68 rpm | 1.1A | 10 kg.cm | 30 kg.cm | 1.7A |
| 138 | 86 rpm | 0.25A | 61 rpm | 1.1A | 11 kg.cm | 33 kg.cm | 1.7A |
| 151 | 79 rpm | 0.25A | 56 rpm | 1.1A | 11.5 kg.cm | 34.5 kg.cm | 1.7A |
| 256 | 46 rpm | 0.25A | 56 rpm | 1.1A | 19 kg.cm | 57 kg.cm | 1.7A |
| 320 | 37 rpm | 0.25A | 26 rpm | 1.1A | 24 kg.cm | 72 kg.cm | 1.7A |
| 400 | 30 rpm | 0.25A | 21 rpm | 1.1A | 30 kg.cm | 90 kg.cm | 1.7A |
| 500 | 24 rpm | 0.25A | 17 rpm | 1.1A | 38 kg.cm | 90 kg.cm | 1.7A |
| 625 | 19 rpm | 0.25A | 13 rpm | 1.1A | 40 kg.cm | 90 kg.cm | 1.7A |
| 756 | 15 rpm | 0.25A | 11 rpm | 1.1A | 40 kg.cm | 90 kg.cm | 1.7A |
| 832 | 14 rpm | 0.25A | 10 rpm | 1.1A | 40 kg.cm | 90 kg.cm | 1.7A |
Note: all reduced no-load speeds have a tolerance of ±15%.
Micro Brushless Gear Motors Outline Drawing


DC Brushless Gear Motors Wiring Tips
◆ Note: The motor's white, blue, and yellow wires can be connected to a 3.3V-5V power supply, but cannot be connected to a 12-24V power supply, otherwise the motor will be burned!
Connect the red wire to the positive pole (+) output port of the power converter, and then connect black wire together with blue wire (VSP) to the negative pole (-) output port of the power converter, the motor will start.
(◆ Note: If only connect the black wire to the negative pole (-) output port of the power converter, the motor cannot be started).
Forward Rotation:
Red Wire: Power Supply Positive (+)
Black + Blue Wire: Power Supply Negative (-)
Other wires: Leave unconnected
Reverse Rotation:
Red Wire: Power Supply Positive (+)
Black + Blue + White Wire: Power Supply Negative (-)
Other wires: Leave unconnected
2838 BLDC Motor + PWM + Power Supply Wiring Tips
Blue Wire: [PWM] Controls Speed Regulation, analog voltage (0-5V) speed regulation.
White Wire: [Forward / Reverse Rotation] Controls motor forward and reverse direction. It will be CCW when the port is not connected, and it will be CW when the port is connected to low level (≤0.6V).
Red Wire: [Motor +] Connect to the positive terminal of the motor controller.
Black Wire: [Motor -] Connect to the negative terminal of the motor controller.
Black Wire: [Power -] Connect to the negative terminal of the power supply.
Red Wire: [Power +] Connect to the positive terminal of the power supply.
◆ Note: Yellow Wire: FG signal output (For external equipment to detect motor speed; 3 pairs of magnetic rings and the motor turn a circle and outputs 9 square wave pulses).
Do not connect to incorrect power supply polarity! Signal wires must not be connected to electricity!
| Motor Terminations | ||||
|---|---|---|---|---|
| Terminations | I/O | Conditions | Remark | |
| GND | IN | Ground | (black wire) Ground | |
| Vcc | IN | DC 12V (Operating Range: 8V~15V) DC 24V (Operating Range: 8V~26V) |
(red wire) Power supply | |
| FG | VOH | OUT | 1.5V≤U≤5.0V, At 5V | (yellow wire) This features an open-collector output (NPN); the FG output can be used to monitor rotational speed based on phase shifting. |
| VOL | Max 0.6V | |||
| FG current | Max 3mA | |||
| FG output pulse quantity |
9 pulse /round | |||
| Pulse Width Modulation (PWM) |
Input voltage | IN | 0~5.0V | (blue wire) |
| VIH High-level voltage |
Min 5V | High level = Motor stop | ||
| VIL Low-level voltage |
Max 0.23V | Low level = Motor run | ||
| Pulse frequency | Recommended pulse operating range: 15KHZ-35KHZ |
Adjusting the voltage from 0.23V to 5V to control the speed, transitioning the motor from high speed to low speed and eventually to a stop. |
||
| CW/CCW | Input voltage | IN | 0~5.0V | (orange wire) Change the direction of rotation |
| VIH High-level voltage |
Min 5V | CCW (Reverse rotation) | ||
| VIL Low-level voltage |
Max 0.3V | CW (Forward rotation) | ||
1. Do not reverse or swap the positive and negative power connections.
2. Always bring the motor to a complete stop before changing the rotation direction; failure to do so may damage electronic or mechanical components.
3. Due to the nature of the gear reduction mechanism, the factory-set rotation direction is not uniform (some gear ratios may default to reverse or forward output).
4. Lowering the speed reduces output torque; please select the output speed carefully (torque is determined by the gear reduction ratio).
D-Shaped Output Shaft: The D-shaped output shaft is machined to increase friction, resulting in smoother transmission and easier connection and fixing.
All-Metal Planetary Gears: Utilizing all-metal planetary gears, this design is compact, small in size, and lightweight. It offers a large transmission ratio, enabling the synthesis and decomposition of motion, balanced transmission, and strong resistance to impact and vibration.
Precision Gear Ring for Motor: Manufactured using specialized equipment, this precision gear ring precisely engages with the gears, ensuring uniform crankshaft rotation.
High-Quality Pure Copper Coil: Made from premium materials of a one-piece molded rotor, this 100% pure copper coil boasts excellent conductivity, long wear life, high temperature resistance, and stable speed.
Built-in Hall Effect Sensor: Through vector control principles, the rotor's rotation angle is freely controlled, thereby increasing torque. It offers high sensitivity and programmability, and strong durability.
Keywords:
brushless dc gear motor, micro brushless gearmotors, brushless gear motor, brushless planetary gear motor, brushless dc worm gear motor
1 review for 28mm Planetary Brushless Gear Motor Model NFP-GA28Y-BL2838
Free Shipping Site-wide When You Spend More Than $150
Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout
Still can't find ideal motors?
Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...
If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.
1 review for 28mm Planetary Brushless Gear Motor Model NFP-GA28Y-BL2838
-
25pcs sample brushless motors have arrived without damage a it looks like it is of high quality. I will soon be testing it in my design. I appreciate the good work of this company. PMD was good to keep good communication even by phone, to make sure that my order was fulfilled properly. Would purchase again.













James Wixted –
25pcs sample brushless motors have arrived without damage a it looks like it is of high quality. I will soon be testing it in my design. I appreciate the good work of this company. PMD was good to keep good communication even by phone, to make sure that my order was fulfilled properly. Would purchase again.