15mm Encoder DC Gear Motor – 50mm Type Model NFP-GW12T-050TZ-EN
Micro Worm DC Gear With Encoder Motor Parameters
All-metal gears: wear-resistant, strong torque resistance, long life, fast heat dissipation, strong composite ability.
Pure copper wire winding: The rotor part adopts pure copper group, low resistance, strong conductivity, and the use of motor torque is increased.
AB two-phase incremental magnetic Hall encoder: basic pulse 7PPRX gear reduction ratio.
| Motor Model | NFP-GW12T-050TZ-EN |
|---|---|
| Weight | Appr. 25g |
| Rated Voltage | 6V DC / 12V DC |
| Shaft Diameter | Φ4mm |
| Output Shaft Length | 7.5mm |
Model: NFP-GW12T-050TZ-EN, 6V DC, 11-Type Input, Power 0.15W
| Ratio | No Load | Rated Load | Stall | ||||
|---|---|---|---|---|---|---|---|
| i : 1 | Speed | Current | Speed | Current | Torque | Torque | Current |
| 42 | 190 rpm | ≤50mA | 140 rpm | ≤0.18A | 0.05 kg.cm | ≤0.17 kg.cm | ≤0.6A |
| 118 | 67 rpm | ≤50mA | 50 rpm | ≤0.18A | 0.15 kg.cm | ≤0.5 kg.cm | ≤0.6A |
| 236 | 33 rpm | ≤50mA | 25 rpm | ≤0.18A | 0.32 kg.cm | ≤1.2 kg.cm | ≤0.6A |
| 302 | 26 rpm | ≤50mA | 20 rpm | ≤0.18A | 0.4 kg.cm | ≤1.5 kg.cm | ≤0.6A |
| 603 | 13 rpm | ≤50mA | 10 rpm | ≤0.18A | 0.8 kg.cm | ≤3 kg.cm | ≤0.6A |
| 1030 | 8 rpm | ≤50mA | 6 rpm | ≤0.18A | 1.2 kg.cm | ≤4.5 kg.cm | ≤0.6A |
Note: all reduced no-load speeds have a tolerance of ±15%.
Model: NFP-GW12T-050TZ-EN, 12V DC, 11-Type Input, Power 0.5W
| Ratio | No Load | Rated Load | Stall | ||||
|---|---|---|---|---|---|---|---|
| i : 1 | Speed | Current | Speed | Current | Torque | Torque | Current |
| 42 | 380 rpm | ≤65mA | 300 rpm | ≤0.23A | 0.1 kg.cm | ≤0.35 kg.cm | ≤1A |
| 118 | 135 rpm | ≤65mA | 105 rpm | ≤0.23A | 0.3 kg.cm | ≤1 kg.cm | ≤1A |
| 236 | 68 rpm | ≤65mA | 53 rpm | ≤0.23A | 0.65 kg.cm | ≤2.5 kg.cm | ≤1A |
| 302 | 53 rpm | ≤65mA | 41 rpm | ≤0.23A | 0.8 kg.cm | ≤3 kg.cm | ≤1A |
| 603 | 27 rpm | ≤65mA | 20 rpm | ≤0.23A | 1.6 kg.cm | ≤6 kg.cm | ≤1A |
| 1030 | 16 rpm | ≤65mA | 12 rpm | ≤0.23A | 2.4 kg.cm | ≤9 kg.cm | ≤1A |
Note: all reduced no-load speeds have a tolerance of ±15%.
Small 12V DC Worm Geared Motors Outline Drawing
Hall encoding has two optional directions:
Welding direction opposite to the shaft; Welding direction the same as the shaft


Worm DC Reduction Gear Motor Encoder Wiring Tips

Motor power supply input M - (red wire)
VCC Hall power supply input (black wire)
C2 encoding signal B phase (yellow wire)
C1 encoding signal A phase (green wire)
GND Hall power supply input (blue wire)
Motor power supply input M + (white wire)
Encoder Parameters:
Type: AB two-phase incremental magnetic Hall encoder
Line speed: basic pulse 7PPRx gear reduction ratio
Power supply voltage: DC 3.3V / DC5.0
Basic function: built-in pull-up shaping resistor, direct connection to microcontroller
Interface type: ZH1.5-6PIN (standard connection line)
Output signal type: square wave AB phase
Response frequency: 100KHz
Basic pulse number: 7 PPR
Keywords:
12 volt dc gear motor, customized dc gear motor, dc gear motor 12v, dc gear motor manufacturers, dc gearbox motor, dc geared motor 12v, dc motor gearbox, dc motor with gearbox, micro dc gear motor, small worm gear motors
Additional information
| Option | 6V, 118 ratio, 67RPM, 6V, 1030 ratio, 8RPM, 12V, 118 ratio, 135RPM, 12V, 1030 ratio, 16RPM |
|---|
Free Shipping Site-wide When You Spend More Than $150
Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout
Still can't find ideal motors?
Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...
If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.













Reviews
There are no reviews yet.