15mm Micro Stepping Gearbox Motor – 20mm Type Model NFP-GM12-15BY-NW
15mm Micro Stepping Gearbox Motor – 20mm Type Model NFP-GM12-15BY-NW
$10.00
Optimize your smart selfie stick’s performance using our 15mm Micro Stepping Gearbox Motor. Quality and functionality in one compact unit!
No Soldering Board Step Gear Motor Parameters
NFP-15BY small stepper motor used for smart selfie stick, smart camera pan/tilt, smart robot camera corner, intelligent micro robots, etc. Speed regulation and direction: forward / reverse are available.
| Motor Model | NFP-GM12-15BY-NW |
|---|---|
| Shaft Diameter | Φ3mm (D-cut 2.5mm) |
| Voltage Range | DC 5V~12V |
| Coil Resistance | 30Ω±7% / PHASE |
| Step Angle | 18° / Step |
| No. of Phases | 2Phases 4Wires |
| Max. Starting Frequency | 900PPS Min. |
| Max. Response Frequency | 1200PPS Min. |
| Pull In Torque | 6 gf-cm Min. |
| Lead Out Torque | 10 gf-cm Min. |
| Rated Voltage | 5V DC |
| Current Per Phase | 160mA / Phase |
| Excitation Method | 2 Phases Excitation |
| Drive Mode | Bipolar Drive |
| Coil Inductance | 9.5 mH / Phase |
| Pull-Out Torque | >4 gf-cm at 500 pps |
| Holding Torque | >16 gf-cm at 0 pps |
| Insulation Class | Class E for Coils |
| Insulation Strength | 100V AC for One Second |
| Insulation Resistance | 50MΩ DC 500V |
| Operating Temperature | -0 ~ +55°C |
| Weight | About 13g |
| Output Shaft Length | 4.4mm / 10mm (can be customized) |
| Ratio | Precise Ratio | Step Angle | 1000PPS Speed | Holding Torque | Pull-Out Torque |
|---|---|---|---|---|---|
| 1:10 | 9.68 | 1.86° | 300rpm | 0.14 kgf.cm | 0.04 kgf.cm |
| 1:20 | 19.36 | 0.93° | 200rpm | 0.28 kgf.cm | 0.08 kgf.cm |
| 1:30 | 29.47 | 0.61° | 100rpm | 0.42 kgf.cm | 0.12 kgf.cm |
| 1:50 | 51.1 | 0.35° | 60rpm | 0.7 kgf.cm | 0.2 kgf.cm |
| 1:100 | 99.3 | 0.18° | 30rpm | 1.4 kgf.cm | 0.4 kgf.cm |
| 1:150 | 150.96 | 0.12° | 20rpm | 2.1 kgf.cm | 0.6 kgf.cm |
| 1:210 | 209.76 | 0.086° | 14rpm | 2.9 kgf.cm | 0.84 kgf.cm |
| 1:298 | 297.9 | 0.06° | 10rpm | Max. 3 kgf.cm | 1.2 kgf.cm |
| 1:380 | 379.16 | 0.047° | 8rpm | Max. 3 kgf.cm | 1.5 kgf.cm |
2 Phase 5V Gearbox Stepper Motor 15BY Outline Drawing

Permanent Magnet Brushless DC Stepper Motor Connection Diagram

Keywords:
step gear motor, stepper gearbox motor, stepping gear motor controller
Additional information
| Ratio & Shaft Length | Ratio 1: 50, Shaft 4.4mm, Ratio 1: 100, Shaft 4.4mm, Ratio 1: 150, Shaft 4.4mm, Ratio 1: 298, Shaft 4.4mm, Ratio 1: 380, Shaft 4.4mm, Ratio 1: 10, Shaft 10mm, Ratio 1: 20, Shaft 10mm, Ratio 1: 30, Shaft 10mm, Ratio 1: 50, Shaft 10mm, Ratio 1: 100, Shaft 10mm, Ratio 1: 150, Shaft 10mm, Ratio 1: 210, Shaft 10mm, Ratio 1: 298, Shaft 10mm, Ratio 1: 380, Shaft 10mm |
|---|
Free Shipping Site-wide When You Spend More Than $150
Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout
Still can't find ideal motors?
Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...
If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.





















Reviews
There are no reviews yet.