20mm Gear Motor With Encoder – 48mm Type Model NFP-GM20-180SH-EN

20mm Gear Motor With Encoder – 48mm Type Model NFP-GM20-180SH-EN

$180.00

Contact us for a quotation for production quantities, customizations and integration.

Miniature DC Gearbox Motor Data Sheets


Single Motor Technical Data

Motor Model NFP-GM20-180SH-EN-18140 NFP-GM20-180SH-EN-09450 NFP-GM20-180SH-EN-10400
Voltage 6V DC 12V DC 24V DC
No-load Speed 7000r/min 4400r/min 10200r/min
No-load Current 90mA 25mA 30mA
At Max. Efficiency Speed 5300r/min 3500r/min 8700r/min
At Max. Efficiency Torque 20 g.cm 13 g.cm 20 g.cm
At Max. Efficiency Current 450mA 90mA 140mA
Output 1.1W 0.5W 1.8W
Stall Torque 85 g.cm 60 g.cm 155 g.cm
Stall Current 1.9A 0.35A 0.85A

 

Gearbox Motor NFP-GM20-180SH-EN-18140-XXX Technical Data

Reduction Ratio Length No-load Speed Rated Speed Rated Torque Max. Momentary Tolerance Torque
29 15.9 mm 230 rpm 180 rpm 0.4 kg.cm 1.5 kg.cm
31 15.9 mm 215 rpm 170 rpm 0.4 kg.cm 1.6 kg.cm
56 17.4 mm 120 rpm 95 rpm 0.7 kg.cm 2.8 kg.cm
73 17.4 mm 90 rpm 73 rpm 0.9 kg.cm 3.7 kg.cm
107 18.9 mm 62 rpm 50 rpm 1.3 kg.cm 5 kg.cm
182 18.9 mm 37 rpm 29 rpm 2.2 kg.cm 5 kg.cm
268 20.4 mm 25 rpm 20 rpm 3 kg.cm 5 kg.cm
349 20.4 mm 19 rpm 16 rpm 3 kg.cm 5 kg.cm
456 20.4 mm 15 rpm 13 rpm 3 kg.cm 5 kg.cm
488 20.4 mm 14 rpm 13 rpm 3 kg.cm 5 kg.cm

 

Gearbox Motor NFP-GM20-180SH-EN-09450-XXX Technical Data

Reduction Ratio Length No-load Speed Rated Speed Rated Torque Max. Momentary Tolerance Torque
29 15.9 mm 145 rpm 120 rpm 0.23 kg.cm 1 kg.cm
31 15.9 mm 135 rpm 113 rpm 0.24 kg.cm 1.1 kg.cm
56 17.4 mm 75 rpm 62 rpm 0.44 kg.cm 2 kg.cm
73 17.4 mm 57 rpm 48 rpm 0.6 kg.cm 2.6 kg.cm
107 18.9 mm 39 rpm 33 rpm 0.8 kg.cm 3.8 kg.cm
182 18.9 mm 23 rpm 19 rpm 1.4 kg.cm 5 kg.cm
268 20.4 mm 16 rpm 13 rpm 1.9 kg.cm 5 kg.cm
349 20.4 mm 12 rpm 10 rpm 2.3 kg.cm 5 kg.cm
456 20.4 mm 9 rpm 8 rpm 3 kg.cm 5 kg.cm
488 20.4 mm 9 rpm 8 rpm 3 kg.cm 5 kg.cm

 

Gearbox Motor NFP-GM20-180SH-EN-10400-XXX Technical Data

Reduction Ratio Length No-load Speed Rated Speed Rated Torque Max. Momentary Tolerance Torque
29 15.9 mm 340 rpm 300 rpm 0.4 kg.cm 3.1 kg.cm
31 15.9 mm 310 rpm 280 rpm 0.4 kg.cm 3.4 kg.cm
56 17.4 mm 175 rpm 155 rpm 0.7 kg.cm 5.2 kg.cm
73 17.4 mm 135 rpm 120 rpm 0.9 kg.cm 5 kg.cm
107 18.9 mm 95 rpm 81 rpm 1.3 kg.cm 5 kg.cm
182 18.9 mm 55 rpm 48 rpm 2.2 kg.cm 5 kg.cm
268 20.4 mm 38 rpm 32 rpm 3 kg.cm 5 kg.cm
349 20.4 mm 29 rpm 26 rpm 3 kg.cm 5 kg.cm
456 20.4 mm 22 rpm 20 rpm 3 kg.cm 5 kg.cm
488 20.4 mm 21 rpm 20 rpm 3 kg.cm 5 kg.cm

 

180SH Reduction Gear Motor Outline Drawing


Keywords:
180sh gear motor, gearbox motor with encoder, gm20 gear motor, 6v gear motor, dc gearbox motors

Additional information

Model

10pcs x NFP-GM20-180SH-EN-18140, 10pcs x NFP-GM20-180SH-EN-09450, 10pcs x NFP-GM20-180SH-EN-10400

Ratio

29:1, 31:1, 56:1, 73:1, 107:1, 182:1, 268:1, 349:1, 456:1, 488:1

1 review for 20mm Gear Motor With Encoder – 48mm Type Model NFP-GM20-180SH-EN

  1. Linda Jenkins

    The n20 gear motor was run stably at 12 V DC for 3 hours. Using this design for a filament winding machine, runs for a long time due to the clever construction of the motor gearbox, hooked up to speed controller slight heat during working, it’s normal, unlike previous overheating.

Add a review

Your email address will not be published. Required fields are marked *

Free Shipping Site-wide When You Spend More Than $150

Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout


Still can’t find ideal motors?

Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote…

If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.

1 + 1 =

1 review for 20mm Gear Motor With Encoder – 48mm Type Model NFP-GM20-180SH-EN

  1. Linda Jenkins

    The n20 gear motor was run stably at 12 V DC for 3 hours. Using this design for a filament winding machine, runs for a long time due to the clever construction of the motor gearbox, hooked up to speed controller slight heat during working, it’s normal, unlike previous overheating.

Add a review

Your email address will not be published. Required fields are marked *