20mm Micro DC Encoder Motor − 39mm Type Model NFP-FK-180SH-EN
20mm Micro DC Encoder Motor − 39mm Type Model NFP-FK-180SH-EN
$10.00
Maximize your project efficiency with our 20mm Micro DC Encoder Motor, featuring a lightweight yet powerful design. Order now to enhance your setup! ⚙️
Micro Carbon Brush DC Motor Technical Parameters
| Motor Model No. | NFP-FK-180SH-EN |
|---|---|
| Rated Voltage | 6V / 12V DC |
| Output Shaft Length | 8.5mm |
| Output Shaft Diameter | Φ2mm Round |
| Weight | Appr. 40g |
| Model | NFP-FK-180SH-06078 | NFP-FK-180SH-12160 |
|---|---|---|
| Rated Voltage | 6V DC | 12V DC |
| No-load Speed | 7800rpm | 16000rpm |
| No-load Current | 0.1A | 0.14A |
| Stall Torque | 10.55 mN.m | 20.92 mN.m |
| Stall Current | ≥2.1A | ≥4A |
| Speed @ Max Efficiency | 6282rpm | 13316rpm |
| Current @ Max Efficiency | 0.41A | 0.69A |
| Torque @ Max Efficiency | 2.05 mN.m | 3.51 mN.m |
| Output Power @ Max Efficiency | 1.4W | 4.9W |
| EFFI. | 54.39% | 58.73% |
| Speed @ Max Output Power | 3900rpm | 8000rpm |
| Current @ Max Output Power | 0.91A | 1.79A |
| Torque @ Max Output Power | 5.27 mN.m | 10.46 mN.m |
| Output Power @ Max Output Power | 2.16W | 8.77W |
| EFFI. | 39.61% | 40.73% |
Miniature Brushed DC Electric Motor Outline Drawing

Small DC Brushed Metal Electric Motor Encoder Wiring

Red Wire: Motor power supply input M1
Black Wire: GND Hall power supply input
Yellow Wire: C2 encoding signal B phase
Green Wire: C1 encoding signal A phase
Blue Wire: VCC Hall power supply input
White Wire: Motor power supply input M2
Encoder Parameters
Type: AB two-phase incremental magnetic Hall encoder
Line speed: basic pulse 11PPRx gear reduction ratio
Power supply voltage: DC3.3V/DC5.0
Basic function: built-in pull-up shaping resistor, direct connection to microcontroller
Interface type: PH2.0-6PIN (standard connection line)
Output signal type: square wave AB phase
Response frequency: 100KHz
Basic pulse number: 11 PPR
Magnetic ring trigger pole number: 22 poles (11 pairs of poles)
Keywords:
180sh motor encoder, carbon brush motor, fk 180 motor, micro dc motor
Additional information
| Voltage & Speed | 6V, 7800RPM, 12V, 16000RPM |
|---|
Free Shipping Site-wide When You Spend More Than $150
Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout
Still can't find ideal motors?
Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...
If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.






Reviews
There are no reviews yet.