36mm Brushless DC Motor – 50mm Type Model NFP-R-BL3650
36mm Brushless DC Motor – 50mm Type Model NFP-R-BL3650
$27.00
Elevate your machinery with the 36mm Diameter Brushless DC Motor, designed for versatility and power. Do not miss out on this incredible motor!
Φ36mm Diameter DC Brushless Motor Parameters
| Motor Model | NFP-R-BL3650 |
|---|---|
| Rotation | CW & CCW |
| Rated Voltage | 12V DC / 24V DC |
| No-load Speed | 3000rpm / 4000rpm / 6000rpm / 8000rpm |
| Shaft Length | 9mm / 12mm / 19mm / 24mm(with notched card slot) |
| Shaft Diameter | Φ3.175mm |
| Weight | Appr. 190g |
| Motor Model | NFP-R-BL3650 | NFP-R-BL3650 |
|---|---|---|
| Nominal Voltage | 12V DC | 24V DC |
| No-load Speed | 4150±10% rpm | 8300±10% rpm |
| No-load Current | ≤230 mA | ≤300 mA |
| Rated Torque | 80 g.cm | 160 g.cm |
| Rated Speed | 3400±10% rpm | 6800±10% rpm |
| Rated Current | ≤0.8A | ≤1.6A |
| Protection Voltage | 30V | 30V |
| Drive Protection Current | 3A | 3A |
Miniature Brushless DC Motor Outline Drawing

12V 24V BLDC Brushless Motor Wiring Tips

Yellow Wire: FG Hall speed measurement signal
Blue Wire: PWM analog speed control 0-5V
Red Wire: Connect to power supply positive pole [+] VCC 12-24V
White Wire: Changing direction switch CW/CCW [forward / reverse rotation]
Black Wire: Connect to power supply negative pole [-] GND 12-24V
◆ Note: Frequent starting or frequent forward and reverse rotation is prohibited to prevent excessive instantaneous current from burning the internal driver of the motor.
| Motor Terminations | ||||
|---|---|---|---|---|
| Terminations | I/O | Conditions | Remark | |
| GND | IN | Ground | (black wire) Ground | |
| Vcc | IN | DC 12V (Operating Range: 8V~15V) DC 24V (Operating Range: 8V~26V) |
(red wire) Power supply | |
| FG | VOH | OUT | Min 4V at 5V10KΩ pull up | (yellow wire) This is the open collector output, which can detect the rotation speed using the FG output according to the phase shift. |
| VOL | Max 0.6V Min 0V | |||
| FG current | Max 5mA | |||
| FG output pulse quantity |
6 pulse /round | |||
| Pulse Width Modulation (PWM) |
Input voltage | IN | 0~5.0V | (blue wire) |
| Speed regulation | 1.2~3.3V analog voltage | Motor speed is proportional to input analog voltage | ||
| CW/CCW | Input voltage | IN | 0~5.0V | (white wire) Change the direction of rotation |
| VIH High-level voltage |
Min 2.0V | CCW (Reverse rotation) | ||
| VIL Low-level voltage |
Max 0.2V | CW (Forward rotation) | ||
Red wire: Connect to the power supply positive pole [+], the positive pole and negative pole cannot be connected incorrectly;
Black wire: Connect to the power supply negative pole [-], the positive pole and negative pole cannot be connected incorrectly;
White wire: Control forward and reverse direction, when disconnected, the motor turns in one direction; connect to the negative pole [-] together with the black wire, the direction will be changed;
Blue wire: PWM speed control, connected to 0~5V pulse width regulator, and also is the brake wire;
Yellow wire: FG signal, basic signal. Motor outputs one signal each revolution.
Firmware performance: brushless stator four-pole magnetism, brushless rotor 6-slot structure.
Drive mode: built-in inductive Hall drive (can also be customized external drive brushless).
Number of encoding output signals: The motor outputs 6 single-phase Hall signal outputs per revolution.
Ball bearing structure: small friction resistance, low noise, long life, fast heat dissipation, strong composite ability.
Hall drive: built-in Hall drive board, can be operated directly by power on, no external drive circuit is required.
Keywords:
small brushless dc motors, 12v brushless dc motor factory, 12v brushless dc motor, 36mm diameter brushless dc motor, brushless dc drone motor, brushless dc motor with encoder
Additional information
| Option | 12V, 3000RPM, Shaft length: 19mm, 12V, 3000RPM, Shaft length: 24mm, 12V, 4000RPM, Shaft length: 9mm, 12V, 4000RPM, Shaft length: 12mm, 12V, 4000RPM, Shaft length: 24mm, 24V, 6000RPM, Shaft length: 19mm, 24V, 6000RPM, Shaft length: 24mm, 24V, 8000RPM, Shaft length: 9mm, 24V, 8000RPM, Shaft length: 12mm, 24V, 8000RPM, Shaft length: 24mm |
|---|
Free Shipping Site-wide When You Spend More Than $150
Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout
Still can't find ideal motors?
Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...
If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.






Reviews
There are no reviews yet.