40mm Brushless Worm Gear Motor − 108mm Type Model NFP-GW5840-BL3650
40mm Brushless Worm Gear Motor − 108mm Type Model NFP-GW5840-BL3650
$45.00
Enhance your projects with our DC Brushless Worm Metal Gearbox Motor, featuring a robust design for reliable performance. Order today for efficiency!
Self-locking Brushless DC Worm Gearbox Motor Data Sheet
| Motor Model | NFP-GW5840-BL3650 |
|---|---|
| Rated Voltage | 12V / 24V DC |
| Size | 40x36x108mm |
| Rotation | CW / CCW |
| Shaft Diameter | Φ8mm (D-shaped) |
| Shaft Length | 15mm (D-cut: 13mm) |
| Speed Regulation | Yes |
| Weight | 395g |
Model: NFP-GW5840-BL3650, 12V DC
| Ratio | No Load | Rated Load | Stall | ||||
|---|---|---|---|---|---|---|---|
| i : 1 | Speed | Current | Speed | Current | Torque | Torque | Current |
| 17: 1 | 175 rpm | ≤200mA | 135 rpm | ≤0.6A | 1.5 kg.cm | ≥6 kg.cm | ≤2.5A |
| 36: 1 | 83 rpm | ≤200mA | 63 rpm | ≤0.6A | 3 kg.cm | ≥12 kg.cm | ≤2.5A |
| 54: 1 | 55 rpm | ≤200mA | 42 rpm | ≤0.6A | 4.5 kg.cm | ≥18 kg.cm | ≤2.5A |
| 72: 1 | 41 rpm | ≤200mA | 32 rpm | ≤0.6A | 6 kg.cm | ≥35 kg.cm | ≤2.5A |
| 106: 1 | 28 rpm | ≤200mA | 21 rpm | ≤0.6A | 9 kg.cm | Max 40 kg.cm | ≤2.5A |
| 212: 1 | 14 rpm | ≤200mA | 11 rpm | ≤0.6A | 18 kg.cm | Max 40 kg.cm | ≤2.5A |
| 280: 1 | 10 rpm | ≤200mA | 8 rpm | ≤0.6A | 24 kg.cm | Max 40 kg.cm | ≤2.5A |
| 590: 1 | 5 rpm | ≤200mA | 4 rpm | ≤0.6A | 40 kg.cm | Max 40 kg.cm | ≤2.5A |
Note: all reduced no-load speeds have a tolerance of ±15%.
There is a power-off protection function after stalling, which needs to be powered on again after power off to recover. It is forbidden to use with a load exceeding 40kg.cm, which is easy to damage the gears. Frequent starting or frequent forward and reverse rotation is prohibited.
Model: NFP-GW5840-BL3650, 24V DC
| Ratio | No Load | Rated Load | Stall | ||||
|---|---|---|---|---|---|---|---|
| i : 1 | Speed | Current | Speed | Current | Torque | Torque | Current |
| 17: 1 | 350 rpm | ≤200mA | 240 rpm | ≤1.3A | 3 kg.cm | ≥10 kg.cm | ≤4A |
| 36: 1 | 165 rpm | ≤200mA | 112 rpm | ≤1.3A | 6 kg.cm | ≥20 kg.cm | ≤4A |
| 54: 1 | 110 rpm | ≤200mA | 74 rpm | ≤1.3A | 9.5 kg.cm | ≥30 kg.cm | ≤4A |
| 72: 1 | 83 rpm | ≤200mA | 55 rpm | ≤1.3A | 12 kg.cm | Max 40 kg.cm | ≤4A |
| 106: 1 | 56 rpm | ≤200mA | 37 rpm | ≤1.3A | 19 kg.cm | Max 40 kg.cm | ≤4A |
| 212: 1 | 28 rpm | ≤200mA | 19 rpm | ≤1.3A | 38 kg.cm | Max 40 kg.cm | ≤4A |
| 280: 1 | 21 rpm | ≤200mA | 14 rpm | ≤1.3A | 40 kg.cm | Max 40 kg.cm | ≤4A |
| 590: 1 | 10 rpm | ≤200mA | 7 rpm | ≤1.3A | 40 kg.cm | Max 40 kg.cm | ≤4A |
Note: all reduced no-load speeds have a tolerance of ±15%.
There is a power-off protection function after stalling, which needs to be powered on again after power off to recover. It is forbidden to use with a load exceeding 40kg.cm, which is easy to damage the gears. Frequent starting or frequent forward and reverse rotation is prohibited.
Brushless Worm Gear Motor M4 Mounting Hole Outline Drawing

Optional mounting bracket (Just make a note when placing an order)

POM worm gear: The combination of copper worm and POM worm gear effectively reduces the overall noise and prolongs the running-in life of the worm gear. Compared with the combination of copper worm gear and copper worm gear, it has lower noise and longer life.
Worm gear structure: Worm gear reduction transmission, strong power-off self-locking force.
Pure copper wire winding: The rotor winding is pure copper wire, low resistance, strong conductivity, and increased torque.
D-shaped shaft: easier to install, not easy to slip, saving installation time.
Built-in Hall driver board: It can operate directly with power, no external driver circuit is required.
Dual ball bearing positioning structure.
DC Brushless Worm Gear Motors Wiring Tips

BLUE Wire: PWM Speed Regulation Wire
BLACK Wire: GND Power Supply Motor Negative Pole (-)
White Wire: CW/CCW Forward / Reverse Switching (-)
YELLOW Wire: FG Hall Signal Feedback
RED Wire: VCC Power Supply Motor Positive Pole (+)
◆Connection Mode:
☞ Type-1
Red Wire: connected to the positive pole (+) of the power supply
Black Wire: connected to the negative pole (-) of the power supply
White Wire: not connected
☞ Type-2
Red Wire: connected to the positive pole (+) of the power supply
White Wire + Black Wire: together connected to the negative pole (-), the rotation of direction will change
☞ Function Wire
Blue Wire: PWM speed regulation control, connected to 0-5V pulse width speed regulator
Yellow Wire: FG signal wire outputs Hall signal, basic pulse one circle 6 signals
The speed control signal is analog PWM 0-5V, not PWM wave speed control (PWM wave speed control needs to be customized)
◆Note: If the positive and negative poles of the power supply are connected incorrectly, and the positive or negative poles of the power supply will touch the FG wire / speed regulation wire, which will burn the driver board and cause the motor to broke!

| Motor Terminations | ||||
|---|---|---|---|---|
| Signal | I/O | Specifications | Remark | |
| Vcc | IN | DC 12V / 24V | (red wire) Power Supply | |
| GND | IN | Power Ground | (black wire) Power Ground | |
| FG | VOH | OUT | 4.0V Min. at 5V 10KΩ pull up | (yellow wire) this is the open collector output, which can detect the rotation speed using the FG output according to the phase shift. |
| VOL | 0V Min. / 0.6V Max. | |||
| FG signal current | 5mA Max. | |||
| FG output pulse quantity |
6 pulse /cycle | |||
| Pulse Width Modulation (PWM) |
Input voltage | IN | 0~5.0V | (blue wire) |
| VIH High-level voltage |
1.6V Min. | High level = Motor running | ||
| VIL Low-level voltage |
1.0V Max. | Low level = Motor stop | ||
| Pulse frequency | 50kHz Max. | Advise 15~25kHz | ||
| CW/CCW | Input voltage | IN | 0~5.0V | (white wire) Change the direction of rotation |
| VIH High-level voltage |
2.0V Min. | CCW (Reverse rotation) | ||
| VIL Low-level voltage |
0.6V Max. | CW (Forward rotation) | ||
Speed Regulation / Brake Stop Wiring Tips
◆ Speed regulation function wiring [Used for speed regulation function, can be forward & reverse rotation]:
Power supply V+: DC power input positive pole DC V+ IN
Power supply V-: DC power input negative pole DC V- IN
Motor Vcc+: Motor positive pole (red line RED)
Motor GND-: Motor negative pole (black line BLACK)
Forward and reverse CW/CCW: Motor commutation line connection (white line White)
Emergency stop BRAKE: Floating and not connected
PWM: Motor speed regulation line connection (blue line BLUE)
FG signal YELLOW wire not connected
◆ Brake stop function wiring [This function cannot be adjusted speed, can be forward & reverse rotation]:
Power supply V+: DC power input positive pole DC V+ IN
Power supply V-: DC power input negative pole DC V- IN
Motor Vcc+: Motor positive pole (red line RED)
Motor GND-: Motor negative pole (black line BLACK)
Forward and reverse CW/CCW: Motor commutation line connection (white line White)
Emergency stop BRAKE: Motor speed control line connected (blue line BLUE)
PWM: suspended and not connected
FG signal YELLOW wire not connected
◆Note: If the speed control board does not have FG signal speed measurement function, please leave the FG signal speed measurement wire not connected, and emergency stop is prohibited. The positive and negative poles cannot be connected in reverse, otherwise the driver board chip will burn.
Application: smart self-balancing two-wheeled vehicle, smart tracking car, smart home appliance robot, camera jib, electric tape cutter, etc.
Keywords:
small worm gearbox, brushless worm gear motor, dc worm gear motor, worm drive gear boxes
Additional information
| Option | 12V 17ratio 175RPM, 12V 36ratio 83RPM, 12V 72ratio 41RPM, 12V 106ratio 28RPM, 12V 280ratio 10RPM, 12V 590ratio 5RPM, 24V 17ratio 350RPM, 24V 36ratio 165RPM, 24V 72ratio 83RPM, 24V 106ratio 56RPM, 24V 280ratio 21RPM, 24V 590ratio 10RPM |
|---|
Free Shipping Site-wide When You Spend More Than $150
Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout
Still can't find ideal motors?
Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...
If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.













Reviews
There are no reviews yet.