24mm Brushless DC Motor – 30mm Type Model NFP-R-BL2430
24mm Brushless DC Motor – 30mm Type Model NFP-R-BL2430
$20.00
Get excellent performance with the 2430 brushless DC motor, featuring dual voltage options and no-load speeds of 6,000 RPM. Enhance your devices now!
Micro DC Brushless Motor Parameters
| Motor Model | NFP-R-BL2430 |
|---|---|
| Rotation | CW & CCW |
| Rated Voltage | 12V DC / 24V DC |
| No-load Speed | 6000rpm / 12000rpm |
| Output Shaft Size | Φ2mm Round Shaft |
| Weight | Appr. 58g |
| Speed Regulation | Yes |
| Hall Encoding | Built-in Hall drive board |
| Model | NFP-R-BL2430-1260 | NFP-R-BL2430-2460 |
|---|---|---|
| Voltage Range | 9.0V – 14.0V | 14.5V – 26.0V |
| Nominal Voltage | 12V | 24V |
| No-load Speed | 6,000RPM | 6,000RPM |
| No-load Current | 0.1A | 0.0585A |
| Speed At Max Efficiency | 4,911RPM | 4,937RPM |
| Current At Max Efficiency | 0.436A | 0.23A |
| Torque At Max Efficiency | 61.82 g.cm | 60.18 g.cm |
| Output At Max Efficiency | 3.11W | 1.53W |
| Speed @ Max Efficiency Power | 3,354RPM | 3,526RPM |
| Current @ Max Efficiency Power | 0.9A | 0.42A |
| Torque @ Max Efficiency Power | 165.7 g.cm | 148.29 g.cm |
| Output @ Max Efficiency Power | 5.119W | 2.369W |
| Stall Current | 1.9A | 0.903A |
| Stall Torque | 331.4 g.cm | 296.6 g.cm |
24V Brushless Motors Outline Drawing


DC Brushless Motors Wiring Tips

BLUE Wire: Pulse Width PWM Speed Regulation Wire (-)
BLACK Wire: GND Power Supply Motor Negative Pole (-)
YELLOW Wire: CW/CCW Forward / Reverse Switching (-)
GREEN Wire: FG Hall Signal Feedback
RED Wire: VCC Power Supply Motor Positive Pole (+)
Direct DC Wiring Method: Connect the red wire to the positive terminal and connect the black and blue wires together to the negative terminal for normal full-speed operation; when connecting the yellow wire to the negative terminal together will reverse the motor's rotation direction.
| Motor Terminations | ||||
|---|---|---|---|---|
| Terminations | I/O | Conditions | Remark | |
| GND | IN | Ground | (black wire) Ground | |
| Vcc | IN | DC 12V (Operating Range: 8V~15V) DC 24V (Operating Range: 8V~26V) |
(red wire) Power supply | |
| FG | VOH | OUT | 6.0V Max | (green wire) This features an open-collector output (NPN); the FG output can be used to monitor rotational speed based on phase shifting. |
| VOL | Max 0.5V | |||
| FG current | 2mA | |||
| FG output pulse quantity |
6 pulse /round | |||
| Pulse Width Modulation (PWM) |
Input voltage | IN | 0~5.0V | (blue wire) |
| VIH High-level voltage |
Min or open 2.0V | High level = Motor stop | ||
| VIL Low-level voltage |
Max 0.5V | Low level = Motor run | ||
| Pulse frequency | Recommended pulse operating range: 15KHZ-25KHZ |
Typical 15 - 25KHz, Max 60KHz | ||
| CW/CCW | Input voltage | IN | 0~5.0V | (yellow wire) Change the direction of rotation |
| VIH High-level voltage |
Min 2.0V | CCW (Reverse rotation) | ||
| VIL Low-level voltage |
Max 0.5V | CW (Forward rotation) | ||
Speed Regulation / Brake Stop Wiring Tips
◆ Speed regulation function wiring [Used for speed regulation function, can be forward & reverse rotation]:
Power supply V+: DC power input positive pole DC V+ IN
Power supply V-: DC power input negative pole DC V- IN
Motor VCC+: Motor positive pole (RED wire)
Motor GND-: Motor negative pole (BLACK wire)
Forward / reverse CW/CCW: motor commutation line connection (YELLOW wire)
Emergency stop BRAKE: is suspended and not connected
PWM: motor speed regulation line connection (BLUE wire)
FG signal GREEN wire is not connected
◆ Brake stop function wiring [This function cannot be adjusted speed, can be forward & reverse rotation]:
Power supply V+: DC power input positive pole DC V+ IN
Power supply V-: DC power input negative pole DC V- IN
Motor VCC+: Motor positive pole (RED wire)
Motor GND-: Motor negative pole (BLACK wire)
Forward / reverse CW/CCW: motor commutation line connection (YELLOW wire)
Emergency stop BRAKE: emergency stop motor speed control line connection (BLUE wire)
PWM: not connected
FG signal GREEN wire not connected
◆ Note: If the speed control board does not have FG signal speed measurement function, please leave the FG signal speed measurement wire not connected and do not connect it to the speed controller when wiring, and emergency stop is prohibited.
◆ Ball Bearing Wiring: RED Wire connect to power supply Positive Pole (+); BLACK Wire + WHITE Wire together connect to power supply Negative Pole (-).
Keywords:
dc motor brushless, small brushless motor, 6v brushless dc motor, 12v brushless dc motor suppliers, brushless dc pancake motor, dc 24v brushless motor factory, dc brushless motor factory
Free Shipping Site-wide When You Spend More Than $150
Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout
Still can't find ideal motors?
Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...
If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.













Reviews
There are no reviews yet.