Precision Mini Drives

nfp electronics professional dc motor provider

Long Shaft High Torque High Speed DC Motor Model NFP-480WA-LS

Long Shaft High Torque High Speed DC Motor Model NFP-480WA-LS

Price range: $19.00 through $59.00

High Speed 480 High Torque Micro DC Motor Parameters


Model NFP-480WA-LS-15#
Testing Voltage 8.4V DC
No-load Speed 23500 rpm
No-load Current 3.5 A
Load Speed 21200 rpm
Load Torque 439 g.cm
Power 97.5%
Load Current 20.5 A
Stall Torque 4485 g.cm
Stall Current 177.2 A
EFF @ Maximum Efficiency 55.8%
Load Torque @ Maximum Efficiency 540 g.cm
Load Speed @ Maximum Efficiency 20680 rpm
Load Current @ Maximum Efficiency 24.5 A
Output Power @ Maximum Efficiency 114.2 W
EFF At Maximum Output 35.6%
Load Torque At Maximum Output 2243 g.cm
Load Speed At Maximum Output 11750 rpm
Load Current At Maximum Output 90.4 A
Output Power At Maximum Output 270.3 W
Weight Appr. 156g

 

Ferrite Wet-pressed Strong Magnet DC Motor Outline Drawing


15# 16# 17# 18# 19# Data Sheet pls clink here

61# Data Sheet pls clink here

65# Data Sheet pls clink here

62#: DC11.1V, 18 Rounds Per Second 27, 38000rpm, 13-16 RPS is not recommended; DC7.4V, 18 Rounds Per Second 17, 25000rpm, 13-16 RPS is not recommended.
1- Ferrite wet-pressed strong magnet; 2- Nylon low thermal conductivity heat-resistant rear cover; 3- Ball bearing structure; 4- MIM injection steel-cut bevel gear; 5- Sealed baked enamel housing; 6- Imported high-performance wear-resistant carbon brushes; 7- Armature dynamic balancing treatment; 8- Mechanical switch control recommended, fire control not allowed.
Feature: High RPM, ordinary torque, with fast continuous shots, and loss single shots. Replace the original motor and increase rate of fire for new players. Recommended for beginners, stable upgrade of firing rate.
Power supply requirement: Use 2.8mm plug spring connector for power delivery; do not solder. It is recommended to abandon the original battery’s SM plug. Tamiya Mini plug or XT30 connector batteries are acceptable. Use thicker wiring if possible.

63#: DC11.1V, 18 Rounds Per Second 27, 37000rpm, 13-16 RPS is not recommended; DC7.4V, 18 Rounds Per Second 17, 24000rpm, 13-16 RPS is not recommended.
1- Ferrite wet-pressed strong magnet; 2- Nylon low thermal conductivity heat-resistant rear cover; 3- Ball bearing structure; 4- Imported hardened powder metallurgy bevel gear; 5- Sealed baked enamel housing; 6- Imported high-performance wear-resistant carbon brushes; 7- Armature dynamic balancing treatment; 8- Mechanical switch control recommended, fire control not allowed.
Feature: High RPM, ordinary torque, with fast continuous shots, and loss single shots. Replace the original motor and increase rate of fire for new players. Recommended for beginners, stable upgrade of firing rate.
Power supply requirement: Use 2.8mm plug spring connector for power delivery; do not solder. It is recommended to abandon the original battery’s SM plug. Tamiya Mini plug or XT30 connector batteries are acceptable. Use thicker wiring if possible.

64#: DC11.1V, 18 Rounds Per Second 27, 37000rpm, 13-16 RPS is not recommended; DC7.4V, 18 Rounds Per Second 17, 24000rpm, 13-16 RPS is not recommended.
1- Ferrite wet-pressed strong magnet; 2- Nylon low thermal conductivity heat-resistant rear cover; 3- Ball bearing structure; 4- MIM injection steel-cut bevel gear; 5- Sealed baked enamel housing; 6- Imported high-performance wear-resistant carbon brushes; 7- Armature dynamic balancing treatment; 8- Mechanical switch control recommended, fire control not allowed.
Feature: High RPM, ordinary torque, with fast continuous shots, and loss single shots. Replace the original motor and increase rate of fire for new players. Recommended for beginners, stable upgrade of firing rate.
Power supply requirement: Use 2.8mm plug spring connector for power delivery; do not solder. It is recommended to abandon the original battery’s SM plug. Tamiya Mini plug or XT30 connector batteries are acceptable. Use thicker wiring if possible.

66#: DC11.1V, 18 Rounds Per Second 27, 37000rpm, 13-16 RPS is not recommended; DC7.4V, 18 Rounds Per Second 17, 24000rpm, 13-16 RPS is not recommended.
1- Ferrite wet-pressed strong magnet; 2- PPS high-rigidity heat-resistant rear cover; 3- Ball bearing structure; 4- MIM injection steel-cut bevel gear; 5- Sealed baked enamel housing; 6- Imported high-performance wear-resistant carbon brushes; 7- Armature dynamic balancing treatment; 8- Mechanical switch control recommended, fire control not allowed.
Feature: High RPM, ordinary torque, with fast continuous shots, and loss single shots. Replace the original motor and increase rate of fire for new players. Recommended for beginners, stable upgrade of firing rate.
Power supply requirement: Use 2.8mm plug spring connector for power delivery; do not solder. It is recommended to abandon the original battery’s SM plug. Tamiya Mini plug or XT30 connector batteries are acceptable. Use thicker wiring if possible.

67#: DC11.1V, 18 Rounds Per Second 25, 35000rpm, 16 Rounds Per Second 29; DC7.4V, 18 Rounds Per Second 17, 23000rpm, 16 Rounds Per Second 19.
1- N35H high-performance NdFeB magnet steel; 2- CNC-machined high thermal conductivity aluminum alloy rear cover; 3- Ball bearing structure; 4- MIM injection steel-cut bevel gear; 5- Air-cooled heat dissipation housing with six-flat hole; 6- Imported high-performance wear-resistant carbon brushes; 7- Armature dynamic balancing treatment; 8- Compatible with fire control chips; 9- Armature equipped with fan blades for air cooling.
Feature: Medium-to-high speed, high torque, stable output, excellent power, and excellent firing rate.
Power supply requirement: High-performance battery with XT30 connector, thickened wire set ≥1mm², silver-plated wires are better. Equipped with air cooling, heats up slower than other high-torque motors of the same speed.

68#: DC11.1V, 18 Rounds Per Second 36, 47000rpm, 16 Rounds Per Second 40; DC7.4V, 18 Rounds Per Second 23, 30000rpm, 16 Rounds Per Second 25.
1- N35H high-performance NdFeB magnet steel; 2- Nylon low thermal conductivity heat-resistant rear cover; 3- Ball bearing structure; 4- Imported hardened powder metallurgy bevel gear; 5- Sealed baked enamel housing; 6- Imported high-performance wear-resistant carbon brushes; 7- Armature dynamic balancing treatment; 8- Mechanical switch control recommended, fire control not allowed.
Feature: High speed, high torque. Designed for high rate-of-fire power support. However, the high RPM causes rapid heat buildup, so 7.4V usage is recommended for more comfortable operation.
Power supply requirement: XT30 connector high-performance battery, ≥1mm² thickened wire harness; silver-plated wire is even better.

69#: DC11.1V, 18 Rounds Per Second 23, 31000rpm, 16 Rounds Per Second 25; DC7.4V, 18 Rounds Per Second 14, 19000rpm, 16 Rounds Per Second 15.
1- N35 high-performance NdFeB magnet steel; 2- Nylon low thermal conductivity heat-resistant rear cover; 3- Ball bearing structure; 4- MIM injection steel-cut bevel gear; 5- Sealed baked enamel housing; 6- Imported high-performance wear-resistant carbon brushes; 7- Armature dynamic balancing treatment; 8- Compatible with fire control chips.
Feature: Medium-to-high speed, high torque, stable output, excellent power. An 18:1 gear ratio matched with a 13-tooth ladder gear, and excellent firing rate.
Power supply requirement: XT30 connector high-performance battery, ≥1mm² thickened wire harness; silver-plated wire is even better. First choice for fire control applications.

Metal Gears: D-shaped shafts with D-hole gears offer easier installation, prevent slippage, and enhance torsional rigidity.
NdFeB Magnets: Two sector-shaped magnets within the motor create a powerful magnetic field, increasing motor torque.
CNC Aluminum Alloy: CNC-finished aluminum alloy back cover offers high strength, rapid heat dissipation, and corrosion resistance.

Keywords:
high speed dc motor, 11.1v bevel gear motor, small high speed motor, high speed micro motor

Additional information

Option

NFP-480WA-LS-62#, NFP-480WA-LS-63#, NFP-480WA-LS-64#, NFP-480WA-LS-66#, NFP-480WA-LS-67#, NFP-480WA-LS-68#, NFP-480WA-LS-69#

Reviews

There are no reviews yet.

Be the first to review “Long Shaft High Torque High Speed DC Motor Model NFP-480WA-LS”

Your email address will not be published. Required fields are marked *

Free Shipping Site-wide When You Spend More Than $150

Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout



Still can't find ideal motors?

Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...

If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.

Reviews

Be the first to review “Long Shaft High Torque High Speed DC Motor Model NFP-480WA-LS”

Your email address will not be published. Required fields are marked *

Presets Color

Primary
Secondary
PMD
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.