nfp electronics professional dc motor provider

32mm Hollow Shaft Brushless DC Gear Motor – 77mm Type Model NFP-JGY-BL2430

32mm Hollow Shaft Brushless DC Gear Motor – 77mm Type Model NFP-JGY-BL2430

$30.00

Optimize your projects with the low noise 2430 worm gear motor long lifetime, featuring impressive no-load speed and torque specifications. Buy it!

Product total
Options total
Grand total

Small Brushless DC Gear Motor Parameters


Motor Model NFP-JGY-BL2430
Rotation CW & CCW
Rated Voltage 12V DC / 24V DC
No-load Speed 3rpm – 150rpm
Out Power 7.2W
Shaft Diameter 6mm
Max Torque 25Kg.cm
No-load Current 0.02A – 0.16A
Output Shaft Length 14mm
Starting Voltage 5V – 6V
Weight Appr. 165g

 

Model: NFP-JGY-BL2430-1260, 12V DC, 6,000RPM

Ratio No Load Rated Load Stall
i : 1 Speed Current Speed Current Torque Current Torque
40: 1 150 rpm 0.12A 112 rpm 0.6A 1.5kg.cm 2A 6.4kg.cm
65: 1 90 rpm 0.12A 70 rpm 0.6A 2.4kg.cm 2A 10kg.cm
90: 1 66 rpm 0.12A 50 rpm 0.6A 3kg.cm 2A 13kg.cm
150: 1 40 rpm 0.12A 30 rpm 0.6A 5.6kg.cm 2A 23kg.cm
200: 1 30 rpm 0.12A 22 rpm 0.6A 7.4kg.cm 2A 30kg.cm
260: 1 23 rpm 0.12A 17 rpm 0.6A 10kg.cm 2A 40kg.cm
340: 1 18 rpm 0.12A 13 rpm 0.6A 12kg.cm 2A 52kg.cm
448: 1 13 rpm 0.12A 10 rpm 0.6A 14kg.cm 2A 61kg.cm
600: 1 10 rpm 0.12A 7 rpm 0.6A 19kg.cm 2A 81kg.cm
1000: 1 6 rpm 0.12A 4 rpm 0.6A 25kg.cm 2A 136kg.cm
1800: 1 3 rpm 0.12A 2.5 rpm 0.6A 25kg.cm 2A 136kg.cm
3000: 1 2 rpm 0.12A 1.5 rpm 0.6A 25kg.cm 2A 136kg.cm
Note: all reduced no-load speeds have a tolerance of ±15%.

Model: NFP-JGY-BL2430-2460, 24V DC, 6,000RPM

Ratio No Load Rated Load Stall
i : 1 Speed Current Speed Current Torque Current Torque
40: 1 150 rpm 0.06A 112 rpm 0.3A 1.5kg.cm 1A 6.4kg.cm
65: 1 90 rpm 0.06A 70 rpm 0.3A 2.4kg.cm 1A 10kg.cm
90: 1 66 rpm 0.06A 50 rpm 0.3A 3kg.cm 1A 13kg.cm
150: 1 40 rpm 0.06A 30 rpm 0.3A 5.6kg.cm 1A 23kg.cm
200: 1 30 rpm 0.06A 22 rpm 0.3A 7.4kg.cm 1A 30kg.cm
260: 1 23 rpm 0.06A 17 rpm 0.3A 10kg.cm 1A 40kg.cm
340: 1 18 rpm 0.06A 13 rpm 0.3A 12kg.cm 1A 52kg.cm
448: 1 13 rpm 0.06A 10 rpm 0.3A 14kg.cm 1A 61kg.cm
600: 1 10 rpm 0.06A 7 rpm 0.3A 19kg.cm 1A 81kg.cm
1000: 1 6 rpm 0.06A 4 rpm 0.3A 25kg.cm 1A 136kg.cm
1800: 1 3 rpm 0.06A 2.5 rpm 0.3A 25kg.cm 1A 136kg.cm
3000: 1 2 rpm 0.06A 1.5 rpm 0.3A 25kg.cm 1A 136kg.cm
Note: all reduced no-load speeds have a tolerance of ±15%.

The motor is forbidden to be stalled.

Hollow Shaft Brushless Gearmotors Outline Drawing


DC Brushless Gear Motor Wiring Tips


◆Note: Connect the motor's red wire to the positive pole (+) output port of the power converter, and then connect the motor's black wire and the white wire together to the negative pole (-) output port of the power converter. (◆Note: If only connect the motor's black wire to the negative pole (-) output port of the power converter, the motor will cannot be started.)

  • ① Power Supply Positive Pole (+)
  • ② Power Supply Negative Pole (-)
  • ③ Motor Negative Pole (-)
  • ④ Motor Positive Pole (+)
  • ⑤ Forward / Reverse Rotation
  • ⑥ Emergency Stop
  • ⑦ PWM

  • ① Power Supply Positive Pole (+)
  • ② Power Supply Negative Pole (-)
  • ③ Motor Negative Pole (-)
  • ④ Motor Positive Pole (+)
  • ⑤ Forward / Reverse Rotation
  • ⑥ Emergency Stop
  • ⑦ PWM

Forward Rotation:
Red Wire: Power Supply Positive (+)
Black + White Wire: Power Supply Negative (-)
Other wires: Leave unconnected
Reverse Rotation:
Red Wire: Power Supply Positive (+)
Black + White + Orange Wire: Power Supply Negative (-)
Other wires: Leave unconnected
Note: Ensure that the motor's positive and negative terminals are connected correctly; reversing the polarity will damage the motor. Speed ​​control requires the use of a dedicated speed controller board or other compatible control devices.

Motor + PWM + Power Supply Wiring Tips
White Wire: [PWM] Controls Speed Regulation, Duty cycle; PWM speed control (15–25 kHz).
Orange Wire: [Forward / Reverse Rotation] Controls motor forward and reverse direction. Default over-current protection is set at 0.8A (automatic protection triggers if the current exceeds 0.8A); stall protection is included, requiring the unit to be powered off and on again to restart.
Red Wire: [Motor +] Connect to the positive terminal of the motor controller.
Black Wire: [Motor -] Connect to the negative terminal of the motor controller.
Black Wire: [Power -] Connect to the negative terminal of the power supply.
Red Wire: [Power +] Connect to the positive terminal of the power supply.
Note: Yellow Wire: FG signal output (For external equipment to detect motor speed; the motor turn a circle and outputs nine square wave pulses).

Motor Terminations
Terminations I/O Conditions Remark
GND IN Ground (black wire) Ground
Vcc IN DC 12V (Operating Range: 8V~15V)
DC 24V (Operating Range: 8V~26V)
(red wire) Power supply
FG VOH OUT 1.5V≤U≤5.0V, At 5V (yellow wire) This features an
open-collector output (NPN); the FG output can
be used to monitor rotational speed based on
phase shifting.
VOL Max 0.6V
FG current Max 3mA
FG output
pulse quantity
9 pulse /round
Pulse
Width
Modulation
(PWM)
Input voltage IN 0~5.0V (white wire)
VIH
High-level
voltage
Min 5V High level = Motor stop
VIL
Low-level
voltage
Max 0.23V Low level = Motor run
Pulse frequency Recommended pulse operating range:
15KHZ-35KHZ
Adjusting the voltage from 0.23V to 5V
to control the speed, transitioning the motor
from high speed to low speed and eventually to a stop.
CW/CCW Input voltage IN 0~5.0V (orange wire) Change the direction of rotation
VIH
High-level
voltage
Min 5V CCW (Reverse rotation)
VIL
Low-level
voltage
Max 0.3V CW (Forward rotation)

 

D-cut Output Shaft: Machined with a flat side (D-cut profile) to increase frictional grip, ensuring smoother power transmission and facilitating secure mounting. (Customization available for length, dimensions, shape, material, etc.)
All-Metal Planetary Gears: Features a compact, lightweight, all-metal planetary gear system. It offers a high gear ratio, enables motion synthesis and decomposition, ensures smooth transmission, and provides excellent resistance to shock and vibration.
High-Quality Pure Copper Windings: Built with a precision-molded rotor and 100% pure copper windings. It offers superior conductivity, high wear resistance, heat tolerance, and stable rotational speed.

Keywords:
brushless dc gear motor, brushless dc gearmotor, dc brushless gear motor, brushless gearmotors, micro brushless gearmotors

1 review for 32mm Hollow Shaft Brushless DC Gear Motor – 77mm Type Model NFP-JGY-BL2430

  1. James Christiansen –

    I have purchased a total of about 40 of these 12v bldc gear motors for “brushbot” workshops with elementary and middle school students (a brushbot is like a bristlebot but bigger), they all get packed tightly in foam box, good, cables are neat and orderly. It can be seen that the merchant is very careful in packaging.

Add a review

Your email address will not be published. Required fields are marked *

Free Shipping Site-wide When You Spend More Than $150

Click The Following Button To Copy the Coupon Code When You’re Going To The Checkout



Still can't find ideal motors?

Get A Quote Within 8 Hours Contact Now! Any question about Micro DC Motor, Spec, Data-Sheet, Quote...

If you want a custom lead wire connection of the water resistant vibration motors. Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form, tell us your need. Any problems will be taken seriously and will be answered professionally, so pls do not hesitate to contact us by the footer form.

1 review for 32mm Hollow Shaft Brushless DC Gear Motor – 77mm Type Model NFP-JGY-BL2430

  1. James Christiansen –

    I have purchased a total of about 40 of these 12v bldc gear motors for “brushbot” workshops with elementary and middle school students (a brushbot is like a bristlebot but bigger), they all get packed tightly in foam box, good, cables are neat and orderly. It can be seen that the merchant is very careful in packaging.

Add a review

Your email address will not be published. Required fields are marked *

Presets Color

Primary
Secondary
PMD
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.